Hawking Technology H-BR49 User Manual download pdf (Page 62)

If the product is working properly, the following should be apparent from this

screen:

1. The Client should have an IP address within the prescribed range

(default 192.168.1. #; where # is from 1 ~ 253).

2. The “DHCP” and “Default Gateway” should list the product’s

local port address (the device’s IP address; the default is

192.168.1.254).

3. The DNS server IP addresses should match the DNS server IP

addresses set in the device.

IPCONFIG

For Win NT and Win2000:

Go to “Start”  ”Programs”  ”Accessories”  ”Command Prompt” to open

the Command Prompt. Type in IPCONFIG /ALL and hit “Enter” to see the

adapter’s information. Type in IPCONFIG /RELEASE to release the IP

addresses of all adapters and IPCONFIG /RENEW to renew the IP addresses.

For a list of the IPCONFIG commands, type in IPCONFIG /? .

PING.EXE

Ping is used to verify that a computer is active and available. Users can “ping” a

specific destination domain name or just the IP address.

Example:

To find the server 168.95.192.1, type the following command at the MS-DOS

prompt and then press “Enter”:

C:\>ping 168.95.192.1

PING can be executed in Windows as shown below:

1. Go to the Start menu.

2. Click Run.

3. Type ping 168.95.192.1 and click OK.

1 2 ... 57 58 59 60 61 62 63 64 65 66 67

No comments

Hawking Technology H-BR49 User Manual Page 62