Hawking Technology H-BR49 User Manual download pdf (Page 20)

Device/Computer Name

Enter a descriptive name for

identification purposes. Some Internet

Service Providers (ISP) require this

information and if that is the case,

they will provide you with the name.

Domain Name

For example: yourcompany.com. The

maximum input for this field is 32

alphanumeric characters and it is case

insensitive

IP Address

Enter the information provided by

your ISP.

Subnet Mask

Enter the information provided by

your ISP.

Gateway

Enter the information provided by

your ISP.

Primary/Secondary

Enter the information provided by

your ISP.

SAVE After completing the settings on this

page, click SAVE to save the settings.

UNDO Click UNDO to clear all the settings

on this page.

LAN Port

This screen contains settings for the LAN interface corresponding to the local

network. You can change the setting to distribute the IP address to local PCs, if

desired. If “Distribute IP address to local computer” is selected, users can enter

the IP addresses assigned for the computers on the LAN. The number of IP

addresses decides the number of clients allowed for the assigned IP addresses.

Note that all the PCs on the same LAN should use the same subnet Mask.

Users can also set Static DHCPs on this page. Users are allowed to set 32 Static

DHCPs. Using this feature, the device will assign the same IP address to a

computer (according to the network adapter’s MAC address) and this computer

becomes the only one able to request that IP address. This is quite useful to set

virtual servers which specifically require fixed IPs for outside Internet access.

1 2 ... 15 16 17 18 19 20 21 22 23 24 25 ... 66 67

No comments

Hawking Technology H-BR49 User Manual Page 20