Hawking Technology Hawking HWPS1UG User Manual download pdf (Page 90)

Port Name: This is the name of your printer port. Each printer

port needs to be assigned a name. The client utility uses this

name to access the printer port.

Upgrade Firmware: You can use the “Upgrade Firmware” tool

to update to the newest firmware of the print server. Click the

button and select the correct firmware version file. After

selecting the firmware file, click the “ Upgrade” button to

finish the firmware update process.

Wireless Function: You can select “Enable” or “Disable” to

manually enable or disable the wireless functionality of the

HWPS1UG Print Server. If you manually enable the wireless

functionality, the print server’s wireless LAN will be always

enabled and Ethernet will be disabled. If you manually disable

the wireless functionality, the print server’s wired LAN

connection will be always enabled and all wireless

functionality will be disabled. You also can select “ Auto” to

let the print server automatically decide to enable or disable

the wireless functionality. The print server can only work in

ether Ethernet or wireless LAN mode. It cannot work in both

Ethernet and wireless LAN mode at the same time. When the

print server initially boots up, it will auto-detect if the LAN

port is connected to an active network through the Ethernet

cable. If the print server is connected to an active network

through the Ethernet cable when booting up, the print server

will run in Ethernet LAN mode (Wired). If the print server is

not connected to an active network through an Ethernet cable

when booting up, the print server will run in wireless LAN

mode (Wireless). The HWPS1UG’s default setting is to run in

“Auto” mode.

1 2 ... 85 86 87 88 89 90 91 92 93 94 95 ... 162 163

No comments

Hawking Technology Hawking HWPS1UG User Manual Page 90