Hawking Technology HWR54G User Manual download pdf (Page 31)

PC Configuration

Figure 15: Windows NT4.0 - IP Address

3. Select the network card for your LAN.

4. Select the appropriate radio button - Obtain an IP address from a DHCP Server or Specify

an IP Address, as explained below.

Obtain an IP address from a DHCP Server

This is the default Windows setting. Using this is recommended. By default, the Wireless

Router will act as a DHCP Server.

Restart your PC to ensure it obtains an IP Address from the Wireless Router.

Specify an IP Address

If your PC is already configured, check with your network administrator before making the

following changes.

1. The Default Gateway must be set to the IP address of the Wireless Router. To set this:

• Click the Advanced button on the screen above.

• On the following screen, click the Add button in the Gateways panel, and enter the

Wireless Router's IP address, as shown in Figure 16 below.

• If necessary, use the Up button to make the Wireless Router the first entry in the

Gateways list.

1 2 ... 26 27 28 29 30 31 32 33 34 35 36 ... 93 94

No comments

Hawking Technology HWR54G User Manual Page 31