Hawking Technology H2BR4 User Manual download pdf (Page 45)

Parameter Description

Enable Port Forwarding Enable Port Forwarding

Private IP This is the private IP of the server behind the NAT firewall.

Note: You need to give your LAN PC clients a fixed/static IP address for

Port Forwarding to work properly.

ype This is the protocol type to be forwarded. You can choose to forward

“TCP” or “UDP” packets only or select “both” to forward both “TCP”

and “UDP” packets.

ort Range The range of ports to be forward to the private IP.

AN Port Assign the WAN port that requires port forwarding. All the packets sent

from this WAN port with the assigned port range will be directed to the

assigned private IP addresses.

omment The description of this setting.

dd Port Forwarding into the table Fill in the "Private IP", “Type”, “Port Range”, “WAN Port” and

"Comment" of the settings to be added and then click "Add". Then this

Port Forwarding setting will be added into the "Current Port Forwarding

Table" below. If you find any errors before adding it and want to type it

in again, just click "Clear" and the fields will be cleared.

emove Port Forwarding into the table If you want to remove some Port Forwarding settings from the " Current

Port Forwarding Table", select the Port Forwarding settings you want to

remove in the table and then click "Delete Selected". If you want to

remove all Port Forwarding settings from the table, just click the "Delete

All" button. Clicking "Reset" will clear your current selections.

Click Apply at the bottom of the screen to save the above configurations. You can now configure other advanced sections

or start using the router (with the advanced settings in place).

1 2 ... 40 41 42 43 44 45 46 47 48 49 50 ... 81 82

No comments

Hawking Technology H2BR4 User Manual Page 45