Hawking Technology HWUG1 User Manual download pdf (Page 33)

- 30 -

Wireless Mode 802.11 B/G mix – If you have a mix of 802.11b and 802.11g

wireless stations in your network, it is recommended to setting the

card to this mode. This mode is also the default setting.

802.11 B or G only – This card can be compatible with both

802.11g and 802.11b wireless stations. If there are only 802.11b

wireless stations in the network, you can set the card to this mode.

The same goes with 802.11g only wireless stations.

Turbo Mode Turbo Mode enables the card to deliver the better throughput in

the same period and environment.

B/G Protection If you have a mix of 802.11b and 802.11g wireless stations in the

network, it is recommended that you enable the protection

mechanism. This mechanism can decrease the rate of data

collisions between 802.11b and 802.11g wireless stations. When

the protection mode is enabled, the throughput of the card will be

a little lower due to more complex data packets that must be

transmitted.

Auto – Based on the status of the network and automatically

disable/enable protection mode.

On – Always enable the protection mode.

Off – Always disable the protection mode.

Fast Roaming These settings should only be used for advanced system

administrators only.

Tx Rate There are several options including

Auto/1/2/5.5/11/6/9/12/18/24/36/48/54Mbps for you to select.

When the “Auto” is selected, the device will choose the most

suitable transmission rate automatically. The higher data rate you

designated in the network, the shorter distance is allowed

between the card and the wireless stations.

When the wireless mode is “802.11 B only”, the maximum data

rate is 11Mbps (11b) so that there are only “Auto/1/2/5.5/11Mbps”

options you can select.

Turn Off RF Button If you want to turn off the radio of the card temporarily, click this

button. To turn on the radio, click this button again.

1 2 ... 28 29 30 31 32 33 34 35 36 37 38

No comments

Hawking Technology HWUG1 User Manual Page 33